<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP IBM System X Physical Memory Sensor

The SNMP IBM System X Physical Memory sensor monitors the memory modules in an IBM server via the Simple Network Management Protocol (SNMP).

SNMP IBM System X Physical Memory Sensor

SNMP IBM System X Physical Memory Sensor

i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: SNMP IBM System X Physical Memory
  • French: IBM System X mémoire physique (SNMP)
  • German: SNMP IBM System X Physikalischer Speicher
  • Japanese: SNMP IBM System X 物理メモリ
  • Portuguese: Memória física IBM System X (SNMP)
  • Russian: Физическая память IBM System X по SNMP
  • Simplified Chinese: SNMP IBM System X 物理内存
  • Spanish: Memoria física IBM System X (SNMP)

Remarks

  • This sensor requires the IBM Systems Director Platform Agent on the target system.
  • This sensor supports IPv6.
  • This sensor has a very low performance impact.
  • This sensor uses lookups to determine the status values of one or more channels.

Detailed Requirements

Requirement

Description

IBM Systems Director Platform Agent

This sensor requires the IBM Systems Director Platform Agent to be installed on the target IBM system to monitor it via SNMP.

i_square_cyanFor more information, see the Knowledge Base: What are the requirements to monitor IBM System x?

Basic Sensor Settings

Basic Sensor Settings

Basic Sensor Settings

Setting

Description

Sensor Name

Enter a name to identify the sensor. By default, PRTG shows this name in the device tree, as well as in alarms, logs, notifications, reports, maps, libraries, and tickets.

i_round_blueIf the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?

Parent Tags

The tags that the sensor inherits from its parent device, parent group, and parent probe.

i_round_blueThis setting is for your information only. You cannot change it.

Tags

Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

i_round_blueIt is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).

i_round_blueFor performance reasons, it can take some minutes until you can filter for new tags that you added.

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • snmpibmphysicalmemorysensor
  • memorycontroller
  • snmpibm
  • ibm

Priority

Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority (i_priority_1) to the highest priority (i_priority_5).

IBM System X Physical Memory Settings

IBM System X Physical Memory Settings

IBM System X Physical Memory Settings

Setting

Description

Name

The name of the memory module that this sensor monitors.

Caption

The caption of the memory module that this sensor monitors.

Serial Number

The serial number of the memory module that this sensor monitors.

Size

The size of the memory module that this sensor monitors.

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how different channels are shown for this sensor:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

i_square_cyanFor more information, see section Inheritance of Settings.

Scanning Interval

Scanning Interval

Scanning Interval

i_square_cyanFor more information, see section Root Group Settings, section Scanning Interval.

Schedules, Dependencies, and Maintenance Window

i_round_blueYou cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.

Schedules, Dependencies, and Maintenance Window

Schedules, Dependencies, and Maintenance Window

i_square_cyanFor more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.

Access Rights

Access Rights

Access Rights

i_square_cyanFor more information, see section Root Group Settings, section Access Rights.

Channel Unit Configuration

i_round_blueWhich channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.

Channel Unit Configuration

Channel Unit Configuration

i_square_cyanFor more information, see section Root Group Settings, section Channel Unit Configuration.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

Controller Condition

The memory controller condition

  • Up status: Completed, In Service, Ok, Power Mode
  • Warning status: Dormant, Predictive Failure, Starting, Stressed
  • Down status: Aborted, Degraded, Error, Lost Communication, No Contact, Non-Recoverable Error, Other, Stopped, Stopping, Supporting Entity In Error, Unknown

i_round_blueThis channel is the primary channel by default.

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Power

The power status

  • Up status: On
  • Down status: Off

More

i_square_blueKNOWLEDGE BASE

What are the requirements to monitor IBM System x?

IBM System X sensors could not find any disk/data on this device (PE187/PE188/PE194)

What security features does PRTG include?

My SNMP sensors don’t work. What can I do?